Wednesday, November 25, 2009

Delete Operation resulting in MySQL Table corruption

As the name suggests, Delete statement is used to delete selected or all rows from the table. The statement also returns a count of all the rows deleted by the user. However, the user always needs a delete privilege to perform delete operation. While the delete operation is safe and easy to perform, it can also result in corruption of the MySQL table. In such situations, the data stored in the table becomes inaccessible and you receive an error message. To overcome such error message and access the data stored in MySQL table, an updated backup always acts as a boon. But if you have not maintained any database backup or back falls short to restore the required data, then you will need to use efficient third-party MySQL Repair application.

Consider a practical scenario, where you run a delete query to delete some records. However, instead of query deleting the records, below error message pops up stating that the table has been corrupted:

“InnoDB: Failing assertion: fil_page_get_type(page) == FIL_PAGE_TYPE_BLOB...”

After the above error message appears, the records stored in the table become inaccessible.

Cause:

Two reasons responsible for the occurrence of the error message could be buggy BLOB handling code or installation of wrong version of MySQL database server.

Resolution:

To completely resolve the above error message and to access the data stored in the table, you will need to follow the below steps:

1.Run check table on corrupt table
2.Then run repair table command on that table
3.Try and re-run the Delete command.
There is still a slight possibility that your table still remains corrupted after following the above steps. For successful and complete repairing of table, you will need to use an advanced MySQL Recovery software. Such tools use powerful repairing methods to provide absolute MySQL Repair in all situations. With interactive user-interface, these tools are easy-to-understand without any prior technical knowledge. These non destructive tools ensure safe repair of database without making any changes in the original MySQL database.

Saturday, November 21, 2009

MySQL Database Table Repair post Power Outage

One of the most common reason for improper shutdown of MySQL Server is power outage. A power failure primarily results in breaking the continuity of the ongoing process resulting in the corruption of MySQL database. In most cases, when you attempt to access the MySQL database after power outage, you encounter an error message that does not allow the database to mount eventually resulting in inaccessibility of records. A standard way to overcome the problems created due to error message is by restoring the data from a valid and updated backup. However, there are possibilities that your backup might get corrupted or damaged. In such situations, only a powerful third-party MySQL Database Repair software can help.

Consider a practical scenario, where you encountered power outage while you were updating some records in Employee table. However, when you restart your system and run a query to view the updations made in Employee table, you encounter the below error message:

“Checking MyISAM file: ric200503
Data records: 0 Deleted blocks: 0
….
MyISAM-table 'Employee' is corrupted
Fix it using switch "-r" or "-o"”

Data stored in Employee table becomes inaccessible after the above error message appears. Furthermore, the above error message pops up every time you attempt to access Employee table.

Cause:

The root cause for the occurrence of the above error message is table corruption due to power outage.

Resolution:

For complete troubleshooting of the above error message and to access the Employee table records, you will need to repair the table using the underneath command:

Repair Table Employee

In most cases, the above command resolves the corruption in Employee table and provides access to the data stored in it. However, if the above command falls short to repair, then you will need to search for powerful third-party MySQL Repair application. These MySQL Recovery utilities employ high-end scanning and repairing algorithms to repair corrupted tables and restore them on default or new destination. With to-the-point user documentation, non destructive nature, and user-friendly interface, these tools ensure fast, easy and complete database repair.

Wednesday, November 18, 2009

MySQL table Repairing process Halts

A severely corrupted MySQL database table is always difficult to repair. Corruption in table not only stops the database to mount, but also makes the records saved in the table inaccessible. Few major causes for severe corruption of MySQL database tables are improper system shutdown, software bugs, and human errors. To surpass the effects of table corruption, restoration from a complete and valid database backup always helps. But, the possibilities for backup being corrupted or damaged always exist. In such situations, an ideal way to access your data is by using an advanced third-party MySQL Database Repair application.

Consider a practical scenario, where you run a query to display the contents saved in a particular table and you encounter an error message stating that the table has been severely corrupted. To repair your corrupted table, you run the below command.

Repair Table Tablename

The above command ran for approximately 15 hours and didn't stopped until you forcefully stopped the never-ending process. Furthermore, while the repairing process was in progress, it occupied all your disk space. The below messages displayed during the repairing process:

-rw-r----- 1 mysql mysql 8.9G May 15 19:52 post.MYD
-rw-r----- 1 mysql mysql 7.8G May 17 18:19 post.MYI
-rw-r----- 1 root root 214M May 17 18:19 post.TMD
-rw-r----- 1 mysql mysql 9.0K Dec 6 11:49 post.frm

The above message indicate that the table from which you want to execute the data is beyond repair of above command. To access your inaccessible records in such situations, you can restore the data from an updated backup. However, in case of no backup availability, only an advanced MySQL Database Repair tool can help.

Such MySQL Recovery tools use high end procedures to repair your corrupted tables and restore them on default or new user-specified location. The database repair software come with highly interactive user-documentation, which guides you through a complete repair process. The non-destructive nature of the software ensures risk-free recovery of recovered data by leaving the original database file untouched and unmodified.

Friday, November 6, 2009

Prevention tips for MySQL database corruption

A corrupted MySQL database is a database in which some of the records are lost and you are not able to perform any functions. While the causes for MySQL database corruption might vary, the result in most cases remains the same – unmountable MySQL database. The best and easiest way to avoid corruption is by following some prevention tips. But, if in case, the database corrupts even after following the prevention tips, then the only to access MySQL database records is by restoring the data from an updated backup. However, if no backup is available or backup falls short to restore the required data, then you will need to opt for an effective MySQL Repair tool.

MySQL database corruption could be a result of numerous factors, to include:

Using “killall -9 mysqld” command to shutdown the server and killing all the ongoing MySQL processes.
Improper shutdown of the MySQL database server due to power outage.
Fiddling with the data files, especially under the feet of mysqld
Internal error in MySQL database server
Kernel Panic
Virus Attack

Prevention Tips:

Always test the kernel with mysqld.
Always have a branded UPS to resume all your operations when you encounter a power outage.
In case of slightest of doubt of MySQL database corruption, run the below commands:
CHECK TABLE tablename
REPAIR TABLE tablename
Always maintain an updated backup. It is advisable to create database backup at least once in a week.
Always have a powerful anti-virus software installed in your system.

The above prevention tips allow you to save your data from most of the corruption scenarios. However, if these prevention fail to save your MySQL database from corruption, and you have not created any backup, then you will need to opt for advanced MySQL Recovery software. Such MySQL Repair applications employ intensive scanning techniques to scan and repair corrupted MySQL database. The easy-to-understand graphical user documentation of the software makes it usable to both technical and non-technical users.

Tuesday, November 3, 2009

Resolving “Checking for corrupt, not cleanly...” Error Message in MySQL database

One of the major reasons for corruption of MySQL database tables is improper or unexpected shutdown of MySQL Server. An improper shutdown can occur due to power outage or human errors. In most of these situations, you encounter an error message that makes the data stored in your MySQL tables inaccessible. To access the data stored in the tables, a perfect and easy way is to restore the data from an updated backup. But if in case, the data backup itself gets corrupted or is unable to restore the required data, then you will need to use advanced MySQL Repair application that can repair the corrupted database and recover inaccessible tables.

Consider a practical example, where you encounter the below error message when you attempt to mount your MySQL database after improper server shutdown:

“Checking for corrupt, not cleanly closed and upgrade needing tables.”

The above error message appears each time you attempt to access the records saved in the MySQL database tables. Furthermore, the error message makes the data stored in the tables inaccessible.

Cause:

The root cause for the occurrence of the above error message is corruption of MySQL database due to improper system shutdown.

Resolution:

To resolve the above error and access the records, you will need to follow the below measures:

Check for the extent of table corruption using the below command:
CHECK TABLE

After checking the extent of corruption, run the below command to repair the tables:

REPAIR TABLE

The above resolution works in most situations and makes the records accessible. But, if in case the resolution fails to resolve the issue and you encounter the above error message again, then you will need to use advance MySQL Recovery software. These MySQL Repair tools use effective algorithms to orderly repair the corrupted tables. Built with highly interactive user-interface, the tool is easily understood by both technical and non-technical users. These non-destructive database repair utilities perform safe repair of database by not modifying the original database.

Monday, November 2, 2009

Repairing corrupt MySQL tables

MySQL table corruption can be easily identified. Few symptoms that allow you to identify table corruption are – queries stop fetching records, display of an error message, and display of incorrect records. The above symptoms primarily results in inaccessibility of records stored in MySQL tables. In such situations, a complete database backup allows you to overcome the problem by restoring all the required data. However, there is a possibility that the data backup is corrupted or does not restore the required information. For absolute repair of corrupted tables under such situations, you will need to opt for advanced MySQL Repair software.

Consider a practical example, where you encounter the below error message when you attempt to access the records saved in Employee table:

“Unexpected end of File”

The above error message makes the data stored in the Employee database records inaccessible. In addition, the same error message re-appears each time you attempt to access the records saved in the Employee table.

Cause:

The root cause for the occurrence of the above error message is the corruption of Employee table. Few main reasons for table corruption can be unexpected system shut down, improper locking of tables, header corruption, virus attack, and human errors.

Resolution:

To resolve the above error and access the records saved in Employee table, you will need to follow the below measures:

Check the Employee table for the extent of corruption using the below command:
CHECK TABLE Employee

If the above command reports corruption, then you will need to repair the table by using the below command:

REPAIR TABLE Employee

In most cases, table corruption gets resolved by using the above command. However, if the problem persists and the same error message appears again while accessing the records, then you will need to use advanced MySQL Database Repair software. Such read only MySQL Recovery utilities employ powerful procedures to to systematically scan and repair the corrupted tables. These repair tools are built with highly interactive user-interface and can be used by both technical and non-technical users.